Best for
Developers or data teams who want a visually rich analytics dashboard combining multiple Recharts chart types, animated KPI cards, and a dark theme with motion effects.
Stack
A ready-made Vizify Dashboard UI you can fork, run, and customize with the prompt pack below.
What's actually inside
The honest engineer's breakdown — what the Vizify Dashboardtemplate does, how it's wired, and where it's opinionated.
Vizify is the most visually ambitious chart template in the V0 community library. Its centrepiece is the KPICardRow — four metric cards that animate into view using Framer Motion's count-up effect on mount. Each card shows a key business number (revenue, users, conversion rate, churn) with a colour-accented trend indicator. The three chart panels below — LineAreaChart, SegmentedBarChart, and DonutChartPanel — cover the most common analytics patterns in a consistent dark card style.
LineAreaChart uses Recharts ComposedChart to layer a line (actual) over an area (target), which is useful for trend-vs-goal comparisons. SegmentedBarChart stacks bar segments with a custom legend breakdown per segment, good for channel or category attribution. DonutChartPanel renders a Recharts PieChart in donut mode with a centre stat (usually a total or percentage) and per-segment tooltips. The ActivityFeedSidebar shows a scrollable list of recent events — each item has a timestamp, category icon, and description. DateRangePicker at the top filters all three charts simultaneously.
Honest caveats: all data is hardcoded static arrays with no fetching layer. Framer Motion count-up animations cause a hydration mismatch if the component lacks 'use client' — this is the most common first-hour failure. The DateRangePicker state change triggers full-page re-renders that replay entrance animations. The DonutChartPanel centre stat is hardcoded to the full dataset total rather than computing from the filtered data. All three issues have fix prompts below and are not showstoppers, but budget an extra half-hour if you are extending this template in a production context.
Key UI components
KPICardRowAnimated cards with Framer Motion count-up for revenue, users, conversion rate, and churn
LineAreaChartRecharts ComposedChart combining a line and area for trend vs target comparison
SegmentedBarChartRecharts BarChart with stacked segments and a custom legend breakdown
DonutChartPanelRecharts PieChart in donut mode with a centre stat and segment tooltips
ActivityFeedSidebarScrollable list of recent events with timestamp and category icon
DateRangePickerDate filter controls that update all three charts simultaneously
Libraries it leans on
RechartsComposedChart, BarChart, and PieChart rendering across the three chart panels
Framer MotionKPI card entrance animations and count-up number transitions
shadcn/ui CardConsistent dark card containers for all chart panels and KPI cards
shadcn/ui SelectDateRangePicker control for filtering all charts
Fork it and get it running
Vizify is an Advanced template — plan for about 10 minutes to fork and verify all animations and chart panels before customising. Everything runs in the browser with no local setup.
Fork the template
Go to https://v0.dev/chat/community/Ck9Z0YDnIQm. The community page shows the Vizify dashboard with its dark theme and animated KPI cards. Click the blue Fork button in the top-right area of the page. V0 copies the full project into your account as a new Project in about 15 seconds. Because this template uses Framer Motion alongside Recharts, the initial load in the sandbox takes slightly longer than simpler templates.
Tip: A free V0 account is all you need. The fork itself costs no credits.
You should see: A new V0 Project opens with the Vizify dashboard code and a live Vercel Sandbox preview.
Verify animations and charts
In the Vercel Sandbox preview, confirm that Framer Motion animations fire on the KPICardRow when the page loads — you should see the count-up effect on each metric number. Check that all three chart panels (LineAreaChart, SegmentedBarChart, DonutChartPanel) render with data. Change the DateRangePicker selection and verify that all charts update. If anything appears blank, try refreshing the preview pane.
You should see: KPICardRow animates on load; all three charts show coloured data; DateRangePicker changes affect all charts.
Update KPI labels and colours in Design Mode
Press Option+D to enter Design Mode. Click the KPICardRow card labels to rename them. Update card accent colours and chart panel headings. Design Mode changes are free — do all visual polish here. Chart data and animation behaviour require chat prompts.
You should see: KPI card labels and card accent colours update in the preview without spending credits.
Replace sample metrics with your real data
In the V0 chat, paste prompt 1 from the Prompt Pack below with your real KPI values and chart datasets. V0 updates the KPICardRow numbers and the data arrays for all three chart panels in one pass. Review the preview to confirm counts, chart shapes, and the DonutChartPanel centre stat all reflect your actual metrics.
You should see: KPICardRow shows your real metric values with correct count-up animations; all three charts display your data.
Publish to a live URL
Click Share (top-right) then select the Publish tab. Click 'Publish to Production'. Vercel builds the Next.js project and deploys in about 30–60 seconds. Because Vizify has more dependencies than simpler templates (Framer Motion + three chart types), the build is slightly longer. You get a live *.vercel.app URL you can share immediately.
Tip: If charts appear blank on the deployed URL but work in the sandbox, the most likely cause is missing 'use client' on the chart components. See the gotchas section.
You should see: Vizify dashboard is live on a Vercel subdomain with all animations and charts working.
Wire to a data source for production use
For production data, prompt V0 to add a Server Component data-fetching layer and export const revalidate = 60 to the page. This tells Vercel to regenerate the page every minute without a new deployment. For per-user data with Supabase, use prompt 5 from the Prompt Pack. For a custom domain, go to Vercel Dashboard → your project → Settings → Domains.
You should see: Dashboard data refreshes via ISR or Supabase per-user auth and the page loads on your custom domain.
The prompt pack
Copy-paste these straight into v0's chat to customize the Vizify Dashboardtemplate. Each one names this template's own components — no generic filler.
Replace KPIs and chart data with your metrics
Replaces all hardcoded sample data across all four KPI cards and all three chart panels with real business metrics in one pass.
In the Vizify dashboard template, replace all sample KPI values in KPICardRow and the datasets in LineAreaChart, SegmentedBarChart, and DonutChartPanel with my real metrics. KPIs: [metric name, current value, change percentage for each of the four cards]. Chart data: [time series data for LineAreaChart, segment breakdown for SegmentedBarChart, category shares for DonutChartPanel]. Keep the DateRangePicker wired to filter all three charts and keep the Framer Motion count-up animations on KPICardRow.
Update KPI card labels and Lucide icons
Renames, re-icons, and recolours all four KPI cards without touching animation or chart logic.
In the Vizify dashboard KPICardRow, rename the four KPI cards to match my business metrics: [Metric 1 name, Metric 2 name, Metric 3 name, Metric 4 name]. Update the Lucide icon inside each card to a relevant icon from shadcn/ui: [icon name per card, e.g. TrendingUp, Users, ShoppingCart, AlertCircle]. Update the colour accent on each card to: [hex colours per card]. Keep the Framer Motion count-up animation and the trend change percentage display on all four cards.
Add chart panel expand to full screen
Lets users expand any chart panel into a full-screen modal for closer inspection of trends or segments.
Add a Maximize2 Lucide icon button to the header of each chart panel in the Vizify dashboard — LineAreaChart, SegmentedBarChart, and DonutChartPanel. When clicked, open that chart inside a shadcn/ui Dialog at 90vw by 90vh so the user can see it full screen. The expanded dialog should render the same Recharts component with larger width and height dimensions passed as props. Add a close button inside the dialog. The expand button should not affect the DateRangePicker filter state.
Wire DateRangePicker to filter all charts via React Context
Connects DateRangePicker to all charts via shared context and prevents KPICardRow from replaying animations on every filter change.
In the Vizify dashboard, make the DateRangePicker filter all three chart panels — LineAreaChart, SegmentedBarChart, and DonutChartPanel — and the KPICardRow simultaneously. Create a React Context called DashboardFilterContext at the dashboard layout level that holds the selected date range. Each chart component should read the date range from this context and filter its data array to only include data points within the range. Wrap KPICardRow in React.memo so it does not re-render (and replay Framer Motion entrance animations) when only the date range changes. Show a shadcn/ui Skeleton in each chart panel while it re-renders after a range change.
Fetch dashboard data from Supabase with row-level auth
Connects the Vizify dashboard to per-user Supabase data with Clerk auth, RLS, and 5-minute ISR refresh.
Wire the Vizify dashboard to Supabase. Create two tables: kpi_snapshots (user_id uuid, metric_name text, value numeric, date date) and events (user_id uuid, event_type text, created_at timestamptz). Use Clerk for authentication — get the signed-in user's ID from auth() in the page Server Component. Fetch the user's data using the Supabase server client initialised with SUPABASE_URL and SUPABASE_SERVICE_ROLE_KEY and pass it as props to KPICardRow, LineAreaChart, SegmentedBarChart, DonutChartPanel, and ActivityFeedSidebar. Add RLS policies on both tables so users can only read their own rows. Set export const revalidate = 300 on the page for 5-minute ISR.
Add export dashboard as PDF
Adds server-side PDF generation for the current dashboard view so users can download a report of their analytics data.
Add an 'Export PDF' button to the Vizify dashboard header. When clicked, it should call a Server Action that posts the current KPI values and chart datasets (respecting the active DateRangePicker selection) to a route handler at /api/export-pdf/route.ts. The route handler should use @react-pdf/renderer to build a PDF document containing the four KPI card values, a table of the LineAreaChart data, and the DonutChartPanel segment breakdown. Return the PDF as a Response with Content-Type: application/pdf and Content-Disposition: attachment; filename=dashboard.pdf. Show a shadcn/ui loading spinner on the button while the export is processing.
Gotchas when you extend it
The failures people actually hit when they push this template past its defaults — and the exact fix for each.
Framer Motion count-up animation in KPICardRow runs during SSR and throws hydration mismatchWhy: Framer Motion's useSpring and useMotionValue hooks produce different values on server and client during the initial count-up. React detects a mismatch between server-rendered HTML and the client's first paint and logs hydration errors.
Fix: Add 'use client' to KPICardRow.tsx and ensure the count-up animation only fires inside a useEffect that runs after mount. Set the initial animated value to match the server-rendered static number so server and client start from the same point.
Fix the KPICardRow hydration mismatch in the Vizify dashboard by adding 'use client' and moving the Framer Motion count-up animation start into a useEffect that fires after the component mounts.
All Recharts charts are blank on Vercel even though they work in the preview sandboxWhy: LineAreaChart, SegmentedBarChart, and DonutChartPanel lack 'use client'. Next.js SSRs them and Recharts SVG measurement returns 0 for all dimensions, producing empty charts. The Vercel Sandbox preview can mask this with a client-side fallback.
Fix: Add 'use client' to the top of LineAreaChart.tsx, SegmentedBarChart.tsx, and DonutChartPanel.tsx, or wrap each in a dynamic() import with ssr: false.
Add 'use client' to the top of LineAreaChart, SegmentedBarChart, and DonutChartPanel in the Vizify dashboard so Recharts renders client-side and charts are not blank after deploying to Vercel.
DateRangePicker state change causes full page re-render and Framer Motion animations replayWhy: DateRangePicker state is stored at the page level in useState. Every range change re-renders the full page, which triggers KPICardRow's Framer Motion entrance animations from the beginning on every filter interaction.
Fix: Move DateRangePicker state to a React Context and wrap KPICardRow in React.memo to prevent it from re-rendering when only the date range changes.
Wrap KPICardRow in React.memo in the Vizify dashboard so it does not re-render (and replay Framer Motion animations) when the DateRangePicker state changes.
ActivityFeedSidebar overflows viewport height on mobile and hides chart panelsWhy: The sidebar uses h-full or min-h-screen without a max-height or overflow-y-auto. On mobile, it expands to its content height and pushes the chart panels below the fold.
Fix: Add max-h-[60vh] overflow-y-auto to the ActivityFeedSidebar container on mobile, or switch to a collapsible shadcn/ui Sheet drawer on small screens.
Fix the Vizify dashboard ActivityFeedSidebar layout on mobile: add overflow-y-auto and max-h-[60vh] so it scrolls independently and does not push the chart panels below the fold.
DonutChartPanel centre stat shows stale total when DateRangePicker filters dataWhy: The centre stat (the number displayed in the donut hole) is a static JSX element hardcoded to the full dataset total. It is not computed from the filtered data prop passed to DonutChartPanel, so it never updates when the date range changes.
Fix: Compute the centre stat dynamically from the filtered data array prop inside DonutChartPanel, not from a hardcoded constant.
Fix the DonutChartPanel centre stat in the Vizify dashboard to compute its displayed total from the filtered data array prop, so it updates correctly when the DateRangePicker changes the date range.
Template vs. custom — the honest call
A forked template gets you far, fast. Here's where it holds up, and where you'll outgrow it.
The template is enough when
- Indie developer or small team building an internal analytics dashboard where visual polish and Framer Motion animations matter
- SaaS product adding an embedded analytics screen with multiple KPIs and chart types that need to look production-quality from day one
- Agency delivering a client-facing data dashboard MVP that needs dark theme, motion, and chart variety without custom design work
- Developer who wants a reference implementation of Recharts ComposedChart and Framer Motion count-up together in Next.js App Router
Go custom when
- You need real-time streaming updates via WebSocket with chart data refreshing sub-second — ISR is not fast enough for live trading or monitoring use cases
- The dashboard must support multiple users with separate data namespaces, RBAC roles, and an audit log of who viewed what
- Chart count exceeds 12+ panels where lazy rendering, virtualisation, and a drag-and-drop layout manager are needed
RapidDev can wire the Vizify dashboard to your data source, add Supabase per-user auth, and optimise Framer Motion performance for production workloads — see rapidevelopers.com.
Frequently asked questions
Is the Vizify Dashboard v0 template free?
Yes. All v0.dev community templates are free to fork. The fork costs zero credits; AI chat customisations draw on your normal V0 credit balance.
Can I use this template commercially?
V0 community templates are published under an MIT-style license permitting commercial use without attribution. Always check the license on the template's v0.dev community page before shipping in a paid product.
Why are all my Recharts charts blank after deploying to Vercel?
The most common cause is missing 'use client' on the chart components. Add 'use client' to LineAreaChart.tsx, SegmentedBarChart.tsx, and DonutChartPanel.tsx. The Vercel Sandbox preview can mask this issue with a client-side fallback — the deployed production build is stricter. The gotchas section above has the exact fix prompt.
Why do the Framer Motion animations replay every time I change the date range?
DateRangePicker state at the page level re-renders the whole page on every change, which unmounts and remounts KPICardRow and restarts the count-up animation. Wrap KPICardRow in React.memo and move the date range state to a React Context. Prompt 4 in the Prompt Pack above handles this fully.
The DonutChartPanel centre number doesn't update when I filter by date — is that a bug?
Yes, it is a known gap. The centre stat is hardcoded to the full dataset total rather than computed from the filtered data prop. Use the fix prompt in the gotchas section to make it reactive to the current filter selection.
How do I connect the dashboard to real per-user data?
Use prompt 5 from the Prompt Pack: it wires KPICardRow and all three chart panels to Supabase tables using Clerk auth, adds RLS so users see only their own rows, and sets 5-minute ISR. You will need a Supabase project and a Clerk account — both have free tiers.
Can RapidDev help build a production version of the Vizify dashboard?
Yes — RapidDev connects V0 dashboards to live data sources, adds Supabase per-user auth, and optimises Framer Motion performance for production. Visit rapidevelopers.com to discuss your project.
Is Vizify suitable for dashboards that need to update in real time (every few seconds)?
Not without additional work. Vizify uses ISR, which refreshes at most every 60 seconds. For sub-second real-time updates you need WebSocket-based data — that is beyond the template's scope and typically the trigger to build a custom solution.
Outgrowing the template?
RapidDev turns v0 prototypes into production apps — real auth, database, and payments — at $13K–$25K.
Book a free consultation30-min call. No commitment.