Best for
SaaS products that need to showcase partner connectors, third-party plugins, or API ecosystem compatibility on a dedicated marketing page.
Stack
A ready-made Integrations Page UI you can fork, run, and customize with the prompt pack below.
What's actually inside
The honest engineer's breakdown — what the Integrations Pagetemplate does, how it's wired, and where it's opinionated.
The Integrations Page template is a self-contained connector showcase built for SaaS marketing teams who need to communicate ecosystem depth without a full documentation site. The layout opens with a FeaturedIntegrationsRow — a highlight strip where 3-5 marquee connectors display animated logos using Framer Motion. Below it, the IntegrationGrid renders every connector as an IntegrationCard: logo, integration name, category chip, and a StatusBadge marking it as live, beta, or coming soon.
The CategoryFilterBar above the grid uses horizontal pill tabs to narrow cards by type (Database, Auth, Payments, and so on). Alongside it, a shadcn/ui Input with a Lucide Search icon enables client-side text filtering without a round-trip. An optional IntegrationModal — built as a shadcn/ui Sheet or Dialog — can surface setup steps and example env vars when a card is clicked. The page closes with a CTABanner containing a headline, a primary 'Get started free' button, and a secondary 'View docs' link.
The honest caveat: the category filter stores active state in component state, which means the selected category resets on page refresh unless you wire it to URL params (the third prompt below does exactly that). The FeaturedIntegrationsRow logo animation is CSS-driven and performant, but if you swap in large PNG logos instead of SVGs the animated strip can cause layout shift on slower connections — serve optimised assets and list their domains in next.config.ts remotePatterns.
Key UI components
IntegrationGridResponsive card grid listing every connector; filtered by CategoryFilterBar and SearchInput.
IntegrationCardSingle tile with logo, integration name, category chip, and a status badge.
CategoryFilterBarHorizontal pill tabs that filter IntegrationGrid by connector type.
SearchInputshadcn/ui Input with Lucide Search icon for client-side text filtering.
FeaturedIntegrationsRowTop-of-page highlight strip for 3-5 marquee connectors with animated logos.
CTABannerBottom conversion section with headline, primary CTA, and secondary docs link.
StatusBadgeSmall shadcn/ui Badge marking each integration as live, beta, or coming soon.
IntegrationModalOptional shadcn/ui Sheet/Dialog revealing connector details, setup steps, and example env vars.
Libraries it leans on
framer-motionAnimatePresence for filter transitions and card entrance animations.
shadcn/uiBadge, Input, Button, Dialog/Sheet — core UI atoms throughout the template.
Lucide ReactIcons for each integration category and the SearchInput field.
Fork it and get it running
Forking the Integrations Page template takes about five minutes in your browser — no local setup required. Follow these steps to go from first look to a live .vercel.app URL.
Open the template in V0
Navigate to https://v0.dev/chat/community/7HOUCTcoR5n in your browser. You will see the live preview of the integration grid on the right and the V0 chat interface on the left. Take a moment to click through the category filter pills and confirm the cards respond before you fork.
Tip: Use the Preview tab's full-screen icon to see the layout at full width before committing to a fork.
You should see: The IntegrationGrid, CategoryFilterBar, FeaturedIntegrationsRow, and CTABanner are all visible and interactive in the preview.
Fork the project
Click the Fork button in the top-right area of the V0 editor toolbar. V0 creates a private copy of the project attached to your account and drops you into the chat interface with the full codebase loaded. Your forked project is now isolated — changes you make here will not affect the community original.
You should see: V0 opens your forked project with a new project name in the header and the full codebase available in the editor.
Verify the preview and filter interactions
Open the Preview tab and test the CategoryFilterBar — click each pill and confirm the IntegrationGrid updates. Type a connector name into the SearchInput to verify client-side filtering. If the preview shows a blank grid or broken logos, check the browser console for shadcn registry errors (see Gotchas below).
Tip: If category pills don't filter correctly, ask V0: 'Why is the CategoryFilterBar not filtering the IntegrationGrid?'
You should see: The integration grid filters correctly on category pill click and on search input text entry.
Add real data or leave static
If you plan to drive the IntegrationGrid from a live data source, open the Vars panel in the V0 sidebar and add your backend environment variable — for example, NEXT_PUBLIC_INTEGRATIONS_API_URL or the Supabase keys from Prompt 4. For a purely static demo or marketing page, no environment variables are needed at this stage.
You should see: Environment variables are saved in the Vars panel and will be injected into the deployed project automatically.
Publish to production
Click Share in the top-right of the V0 editor, then open the Publish tab and click 'Publish to Production'. Deployment finishes in approximately 30 seconds. V0 hands you a live .vercel.app URL you can share immediately.
You should see: A live .vercel.app URL is returned; the IntegrationGrid renders correctly in production including the FeaturedIntegrationsRow animations.
Connect a custom domain
From the V0 project menu in the top-right, open the linked Vercel Dashboard. Navigate to Domains → Add domain, type your domain name, and follow the CNAME or A record instructions for your DNS provider. SSL provisioning is automatic. After DNS propagation (up to 48 hours, often minutes), your integrations page is live on your brand domain.
You should see: Your custom domain resolves to the integrations page with a valid SSL certificate.
The prompt pack
Copy-paste these straight into v0's chat to customize the Integrations Pagetemplate. Each one names this template's own components — no generic filler.
Replace placeholder logos with real brand SVGs
Swaps placeholder logo divs in IntegrationCard for real brand images without touching the card layout or StatusBadge position.
Replace every IntegrationCard logo placeholder with a real SVG: swap the grey placeholder div in each card with an <img> tag pointing to the official logo URL for that connector (e.g., Stripe, GitHub, Slack). Keep existing card sizing, border-radius, and the StatusBadge position unchanged. Ensure next/image remotePatterns in next.config.ts includes the CDN domains for the logo URLs you add.
Add a 'Coming Soon' overlay to unavailable cards
Adds a visual 'coming soon' state to IntegrationCard using a shadcn/ui Badge and a semi-transparent overlay, preventing accidental modal opens.
In IntegrationCard, add a conditional semi-transparent overlay with the text 'Coming Soon' that appears when the card's status prop is 'coming-soon'. Render a shadcn/ui Badge in amber color positioned in the top-right corner of the card to indicate the status. When the overlay is active, reduce the card's opacity to 0.6 and disable pointer events so clicking an unavailable card does not open the IntegrationModal.
Wire CategoryFilterBar state to a URL search param
Makes the active category filter persistent in the URL so users can share a pre-filtered integrations page, and avoids useSearchParams hydration errors.
Refactor the CategoryFilterBar so the active pill state is stored in a URL search param named 'category' (e.g., ?category=payments). On page load, read that param with Next.js useSearchParams and pre-filter the IntegrationGrid to match. When the user clicks a different pill, call router.push with the updated param so the filtered URL is shareable and browser-back works correctly. Wrap CategoryFilterBar in a React Suspense boundary with a fallback showing the full unfiltered IntegrationGrid to avoid a hydration mismatch.
Pull integrations list from a Supabase table
Replaces the hardcoded integrations array with live Supabase data, adds a loading skeleton, and sets up correct RLS so the grid is publicly readable.
Create a Supabase table named integrations with columns: id (uuid), name (text), category (text), status (text — 'live' | 'beta' | 'coming-soon'), logo_url (text), and description (text). Update the IntegrationGrid component to fetch rows from Supabase on the server using the @supabase/ssr createServerClient in a React Server Component. Show a shadcn/ui Skeleton placeholder grid while data loads via a Suspense boundary. Read NEXT_PUBLIC_SUPABASE_URL and NEXT_PUBLIC_SUPABASE_ANON_KEY from the Vars panel. Add a Supabase RLS policy that allows public SELECT on the integrations table.
Add an integration request form with email capture
Adds an integration request flow off the CTABanner: a validated Dialog form that persists to Supabase and sends a Resend confirmation email, with duplicate detection.
Add a 'Request Integration' button to the CTABanner that opens a shadcn/ui Dialog containing a form with three fields: integration name, website URL, and requester email. Validate all fields with zod — email must be a valid address, name and URL must not be empty. On submit, POST to /api/request-integration which inserts the entry into a Supabase table named integration_requests (columns: id, name, url, email, created_at) using the service role key, and sends a confirmation email via Resend (@resend/node) to the requester's address. Return a 409 response if the same email has already requested the same integration name. Show a shadcn/ui Toast on success and on error.
Gate IntegrationModal content behind Clerk auth
Adds Clerk auth gating to IntegrationModal and the /integrations/[slug] route so integration details are only visible to signed-in users.
Wrap the IntegrationModal content with a Clerk authentication check: if the user is not signed in, replace the modal body with a sign-in prompt containing a shadcn/ui Button that triggers the Clerk sign-in flow. Use clerkMiddleware in middleware.ts to protect the /integrations/[slug] dynamic route so server-rendered detail pages are also gated. Add NEXT_PUBLIC_CLERK_PUBLISHABLE_KEY and CLERK_SECRET_KEY to the Vars panel. Show the user's display name in the IntegrationModal header when they are authenticated.
Gotchas when you extend it
The failures people actually hit when they push this template past its defaults — and the exact fix for each.
"The component at https://ui.shadcn.com/r/styles/new-york-v4/badge.json was not found."Why: V0 generates Badge references using the new-york-v4 registry path which may not match the shadcn CLI version installed in exported projects.
Fix: Run `npx shadcn@latest add badge` after export; if that fails, manually copy the Badge component source from ui.shadcn.com/components/badge.
Fix any 'component not found' registry errors in this project by replacing missing shadcn import references with manually added components. Install Badge, Input, and Button locally via shadcn CLI. If the CLI registry fetch fails, paste the component source directly into components/ui/ and update the import paths.
Client-side filter logic causes hydration mismatch when useSearchParams is used without a Suspense boundaryWhy: Filter state derived from URL params renders differently on the server versus the client when useSearchParams is used in a component that is not wrapped in Suspense.
Fix: Wrap CategoryFilterBar in a <Suspense> boundary with a fallback showing the full unfiltered IntegrationGrid, and add the 'use client' directive to the CategoryFilterBar component file.
Wrap CategoryFilterBar in a React Suspense boundary with a fallback showing the full unfiltered IntegrationGrid. Make sure the component uses the 'use client' directive at the top of the file.
Framer Motion AnimatePresence loses card exit animations after re-filtering the IntegrationGridWhy: Cards need a stable key prop matching the integration's unique ID — not the array index — for AnimatePresence to track individual items and play exit animations when a filter removes them.
Fix: Pass key={integration.id} on each IntegrationCard inside the AnimatePresence wrapper, not key={index}.
Update IntegrationGrid to use integration.id as the key prop on each IntegrationCard inside the AnimatePresence wrapper so exit animations work correctly when the CategoryFilterBar filter changes.
`window is not defined` when next/image tries to optimise external logo URLs during the SSR passWhy: External logo domains referenced in IntegrationCard's <Image /> tags must be whitelisted in next.config.ts before next/image can optimise them; V0 preview skips this check but Vercel deployment enforces it.
Fix: Add each logo CDN domain to the images.remotePatterns array in next.config.ts and redeploy.
Add the necessary remotePatterns entries to next.config.ts to allow next/image to load SVG and PNG logos from all external CDN domains used in IntegrationCard components.
Template vs. custom — the honest call
A forked template gets you far, fast. Here's where it holds up, and where you'll outgrow it.
The template is enough when
- Showcasing a fixed set of 10-50 known integrations with logos, category chips, and status badges.
- Launching a SaaS MVP that needs a polished connectors page before full API documentation is ready.
- Internal portals where a search + filter grid satisfies all stakeholder requirements.
- Design agency presenting an app concept or pitch deck where a live connector page adds credibility.
Go custom when
- The integrations list is dynamic and user-scoped — each account sees different connectors based on their subscription tier.
- You need deep per-integration documentation pages with multi-step setup guides, versioned changelogs, and embedded code samples.
- Advanced search with facets, pagination, and relevance ranking is required across hundreds of entries.
- The page must support install/uninstall actions that hit a backend API and reflect real-time webhook sync status.
If the integrations grid is your product's core marketing surface and you need it production-hardened — with auth-gated install flows, real-time sync status, and a CMS for managing connector listings — RapidDev can take the V0 scaffold to that level without rebuilding from scratch.
Frequently asked questions
Is the Integrations Page V0 template free to use?
Yes. Community templates on v0.dev are free to fork. Forking uses your V0 account credits, and subsequent AI edits consume credits based on your plan. The template code itself has no licensing fee.
Can I use this template commercially — for example, as a marketing page for a paid SaaS product?
Yes. V0 community templates are published under permissive terms that allow commercial use. You own the code in your forked project. Check v0.dev's current terms of service for the authoritative statement, as licensing terms can change.
Why does my fork break in preview after I change the CategoryFilterBar?
The most common cause is a missing Suspense boundary around CategoryFilterBar when useSearchParams is involved. V0 preview may render correctly but production builds throw a hydration mismatch. Wrap CategoryFilterBar in <Suspense> and add 'use client' to the component file. If the grid itself disappears, check that the AnimatePresence key prop uses integration.id rather than the array index.
How do I connect the IntegrationGrid to a real database instead of hardcoded data?
Use Prompt 4 in the pack above: it walks V0 through creating a Supabase integrations table, updating IntegrationGrid to fetch from it using @supabase/ssr, and adding a Skeleton loader while data loads. You'll need to add NEXT_PUBLIC_SUPABASE_URL and NEXT_PUBLIC_SUPABASE_ANON_KEY in the Vars panel.
The exit animations on IntegrationCard disappear when I change category filters — what's wrong?
This is the AnimatePresence key-prop trap: if each IntegrationCard uses key={index} instead of key={integration.id}, Framer Motion cannot track individual cards and skips exit animations. The fix is one line — replace the index key with the integration's unique ID. Prompt 3 in the pack fixes this automatically.
Can I add a search input that filters the grid across integration name and description?
The SearchInput component is already wired for client-side filtering, but by default it may only match on name. Ask V0: 'Update SearchInput to filter IntegrationGrid cards by both the integration name and description fields, case-insensitive.' No backend change is needed for a static list.
Can RapidDev customize this template for my product's integrations page?
Yes. RapidDev works with V0-generated codebases and can extend the integrations grid with auth-gated install flows, real-time sync status pulled from your API, and a CMS so your team manages connector listings without touching code. You keep the design you already have.
The StatusBadge shows 'coming soon' but I want it to reflect live data from my backend — how?
Once you wire IntegrationGrid to Supabase (Prompt 4), the StatusBadge reads its value from the status column in each integration row. Set status to 'live', 'beta', or 'coming-soon' in the database and the badge updates automatically on every page load.
Outgrowing the template?
RapidDev turns v0 prototypes into production apps — real auth, database, and payments — at $13K–$25K.
Book a free consultation30-min call. No commitment.